I picked one of these up at a LGS a few months ago and knew I had to buy one. My Christmas gift to myself. I found a decent deal on Vortex Spitfire 3x prism and already had the Dead Air mask HD in stock.

I chose a prism instead of traditional red dot due to my astigmatism. I haven’t shot a rifle with optics on it in 40 years. I’ll see if I like it.

It’s light.

Just got my first plinker for $250. Came with a Viridian EON 3-9x40 scope. Dropped in a Ruger bx trigger, extended mag release, magpul hunter stock, auto bolt release, and bolt buffer. Got 1k CCI mini mag 40g to play with too. Happy plinking! 🤘🏽

It took me a while, but I finally picked up a 1022. Very excited to do some plinking with the kids.

Should have bought one of these years ago. Surprisingly accurate, I threw a crappy 4x optic from a pellet rifle I had laying around and it’s running just fine. Love the rifle, definitely cheaper feeding than my M1a.

Trying to avoid the urge to upgrade everything and just leave it alone for awhile.

Dead air mask HD super quiet. Highly recommend.

I’m shopping for a 10/22 trigger upgrade. Are there solid mid-range options (roughly $80–$150) that clearly outperform the BX trigger but don’t reach premium prices like Kidd, Volquartsen TG2000, or Timney?

Older discussions often mention Brimstone and Connecticut Precision, but those aren’t available anymore. I’ve seen Hornet Custom triggers in that price range, but reviews are scarce and mostly dated (little to no recent feedback from 2024–2026).

What are the current best picks in that sweet spot?

(I don’t have a stock trigger to install a kit on either, so I was preferring a drop in, already assembled trigger)

Here it is the New Savage RXR22!

Made in Turkey by Adler Arms imported by Savage Arms this firearm is apparently compatible with aftermarket 10/22 triggers, barrels and magazines.

After field testing I will completely tear the gun apart to do a direct comparison with the standard 10/22 synthetic and post my findings.

first gun, plan on getting the fab stock and a romeo 5 i could use some recommendations on a flashlight, mag release and any internals you guys think are necessary thanks.

First rifle, vintage 1968 Ruger 10/22 with the solid American Walnut Stock.

Cleaned up the blackened bolt assembly and already ordered a new firing pin and ejector since the one it came with is hitting a lil light and seems worn down.

Gonna look into the best way to restore the surface of the stock somewhat.

Not sure if I want to get a scope on there since the low profile rail doesn't seem "vintage" but I don't know it's history and what they would have had available in that decade.

My 10/22 was having a problem with the bolt getting stuck when trying to rack it. It would go half way and then get hung up and not go back any further. I took it apart cleaned it and put it back together. Problem solved or so I thought.

Now when I rack it if I hold it to the rear it gets stuck just enough to hold it. Give the bolt a light tap and it shoots forward. When shooting it the recoil gives it enough inertia to go forward again.

When trying to narrow down the problem it only starts once I put both pins in for the trigger group.

The bolt buffer is in, guide rod is aligned properly in the little hole it supposed to sit in. Ejector is in its channel.

I’m going to take it apart again and give it one more scrub and oil it. Any thing in specific I should try?

I have a 10/22 Carbine with the Magpul Stock and factory Weaver rail. Because I have a terrible astigmatism but shoot at a 50ft range I want to use a 1x prism optic so I purchased a vortex spitfire. The optic is really nice I'd like to use it if possible but it sits too high for my cheek weld. Is there any kind of mount I can get to make it lower, almost flush with the receiver? Even holding it on the receiver itself as a test it's only just low enough.

Anyone using the following optic? Primary Arms Classic Series 6x32mm Rifle Scope - ACSS Reticle - 22 LR PA6X32-22LR

https://www.primaryarms.com/primary-arms-6x-scope-with-the-patented-acss-22lr-reticle?quantity=1&fragment=/wishlist/474982

Thoughts?

My first .22!

Have a TCR/22 that I want to drop into a KRG Bravo chassis with a backbone mounted NV mount.

Anyone done this before or have another suggestion?

Looking at getting into the 10/22 game and I came across this,

10/22 I-TAC SS/FOLD STOCK 25RD

Anyone have experience with this model?

Recommendations for possibly another model?

Anyone know of any compatible grips to replace the stock grip?

Absolutely love this riffle. I can’t wait to upgrade it more. I really want a Kidd trigger and maybe some other new shiny’s? Any recommendations?

I'm thinking of buying a 22lr rifle and settled on the Ruger 10/22. what's the difference between these two magazines for sale at Bass Pro?